Discription :

Radar sensor led tube are widely used in passageway, lobby and freight house and other place which need 24hours' lighting.

It's able to detect the human body temperature and tell whether there are people passby by infrared sensor and control

the tube turn on or turn off.  With such pir sensor system, more energy can be saved and more labor cost will be reduced.

1.Time last:30-60 seconds 

2.Sensor distance/degree: 

3.Delay time:30-60 s

4.Respone time:<0.5s

5.Induced by infrared ray.

6.Cars or person coming to active area will be lighted at 12w all the time,while cars or person left the inductive area 30-40 seconds later,

it will be at 2.5w or customized adjusting.

7.According to the experience,using the infrared led tube light can save more than 90% energy.

Installation:

 1.Standard installation 
   Connect directly to AC power, this is the most energy saving model
2.Repalcing installation 
   If there’s a starter on the old fluorescent light fixture, remove the starter
3.Remove electronic ballast 
   If there’s no starter on the fluorescent light fixture, remove the electronics ballast  

Speciality:

1. Isolated power supply and can be replaced easily by hand

2.High Ilumination 0.06W SMD LED and low light decay

3.Constant LED forwarder current during tube operating

4.Temperature difference less than 10°C between inside and outside

5.Healthy and environmental                       

6.HG free-avoid the poisonous material

7.UV free-no harmful to the screen

8.No flash-to protect the eyes

9.Low-carbon

10.Energy saving and durable

Parameter: